Copper slag as fine aggregate for high performance concrete.

Copper slag (CS) is a waste material widely obtained from the industrial sector in the manufacturing of copper during the matte smelting process. When copper liquid settles down in the smelter due to its higher density, the smears of copper slag remaining on the surface (also.

Abstract: Copper slag, containing more than 40 wt% iron, is often used for pavement of roads, building bricks and cement etc. The level of this traditional utilization technology is very poor. In this study, a new method of comprehensive utilization of copper slag was investigated.


Copper Slag Research Paper

The present paper explains about the utilization of high volume copper slag in concrete. The study leads towards cleaner production, by utilizing industrial by-product i.e. copper slag as a replacement to natural river sand as fine aggregate.

Copper Slag Research Paper

This paper presents results from an experimental investigation carried out to study the potential use of copper slag as fine aggregate on the strength of both normal and high strength concrete. Concrete mixtures were prepared using.

Copper Slag Research Paper

In this paper, an experimental work was carried out to investigate the effect of copper slag as a fine aggregate on the properties of concrete. For this work, copper slag is a byproduct of copper production, which contains large amounts of iron oxide and silicate and is chemically stable.

 

Copper Slag Research Paper

Copper slag is an industrial by-product of copper smelting and refining from copper ores. Typically, approximately 2.2-3.0 tons of copper slag can be obtained by producing one ton of copper, and it.

Copper Slag Research Paper

This paper gives a review of characteristics of copper slag as well as various processes such as pyro, hydro and combination of pyro-hydrometallurgical methods for metal recovery and preparation of value added products from copper slag. Previous article in issue Next article in issue.

Copper Slag Research Paper

C. Copper Slag Copper slag is the material which is considered as a waste material, which can have a bright future in construction industry as partial or full replacement of either cement or aggregates. It is a by- product obtained during the matte smelting and refining of copper.

Copper Slag Research Paper

In this present works, for M30 grade concrete beam copper slag is replaced for sand at0%, 20%, 40%, 60%, 80% and silica fume is used as an admixture in concrete. The various concrete workability tests such as slump flow test, T50cm slump flow ,V-funnel test, J- ring and L-box tests were performed.

 

Copper Slag Research Paper

In this research paper, Use of copper slag (CS) as a replacement for fine aggregate (FA) in RC slender columns was experimentally investigated in this study. Author performed tests to determine basic properties of concrete and also determine lateral deflection and vertical deflection for the RC column made by copper slag concrete.

Copper Slag Research Paper

The use of copper slag in cement and concrete provides potential environmental as well as economic benefits for all related industries, particularly in areas where a considerable amount of copper slag is produced. This paper reviews the characteristics of copper slag and its effects on the engineering properties of cement, mortars and concrete.

Copper Slag Research Paper

Previously so many research were conducted by replacing cement with fly ash and sand with copper slag to find out the maximum strength of concrete. replacement of cement and 10%, 20%, 30%, 40% of copper slag as replacement of sand.

Copper Slag Research Paper

Papers by Keyword Copper Slag scientific. Journal of Nano Research As a conclusion the use of copper slag as a sand replacement seemed to be a practical option 862 Abstract In this paper the effects of using copper slag wastes on hydration gelling properties mechanical properties pozzolanic activity and durability aspects of.

 


Copper slag as fine aggregate for high performance concrete.

The paper examines the possibility of using copper slag as partial replacement of sand and Nano Silica as partial replacement of cement and super plasticizer and Viscosity Modifying Agent are used in self.

Table 9: Performance of slag cements prepared by using 35% copper slag at different fineness. Observation and Analysis: Chemical analysis of granulated blast furnace and copper slag are given in Table 1. The results indicate that granulated blast furnace slag conforms to all the requirements of Indian Standard Specification IS: 12089-1987 for the manufacture of PSC unlike copper slag.

When Copper Slag is produced granular form, behaviour of Granulated Copper Slag (GCS) seems to be similar to river sand and hence GSC was investigated as sand replacement material in the study presented in this paper. The test data shows that since the GCS has higher fineness modulus (indicating.

In this paper, a review of the previous research studies carried out by various researchers on utilization of copper slag in geotechnical applications is discussed and presented. Keywords: Copper slag, strength properties, Replace soil and sand with alternate materials.

The chemical traces copper, sulphate and alumina present in the slag are not harmful many researchers had already found ,copper slag possible to use as a material in concrete In this experiment study copper slag in concrete as replacement material of fine aggregate.

This paper presents the results of an experimental investigation on the properties of concrete using silica fume and copper slag as partial replacement for cement and fine aggregate. In this research work, M20 grade concrete was used and tests were conducted.